(Phone needs to support
voice wake-up function)
Headphone introduced Charge
The headphone uses a built-in rechargeable battery ,
Music Play
Operating instruction
AI intelligent voice control
Product parameter
Bone Conduction Bluetooth Headphone
How to pair with Bluetooth
Bone Conduction Bluetooth Earphone
Headphone status
Function
Operation
click “- ”
Operation
the first use of the headphone must be fully charged to
the battery .In use , if the voice promps "low battery", the
battery is low, and you need to charge the headphone.
Function
headphone status
Charging time: About 2 hours
Distance: Bluetooth 10 meter
Battery: 230mAh
Play: More than 5 hours@70% volume
Agreement: a2dp1.3.2\avctp1.4\avdtp 1.3\ avrcp
1.6.2\hfp 1.8 \spp 1.2\rfcomm 1.1\pnp 1.3\hid1.1.1\
sdpcore5.3\l2cap core 5.3
Version: 5.3
Bluetooth pairing:In the off state, press and hold
the power button for 3 to 5 seconds, the light into the
red and blue flashing state, and then enter the pairing
state. Turn on the Bluetooth (cell phone/computer) on
the device and search for he device name " X6 ", click
the device" X6 "to pair and connect.
Input: 5V/180mA
Increase volume
Play music
Play music
Bluetooth is
connected
Press and hold the On/Off
button fro 1 second
Voice control
click “+”
Reduce volume
Last song
Press and Hold “ + ”
Click and Hold “ - ”
Play music
Play music
The charging cable should be connected to the
①
Description: In the Bluetooth connection state,long
press the power on button for 1 second to wake up, after
hearing the tone you can voice manipulate the phone,
save the time to operate the phone, fast and intelligent.
Next song
headphone magnetic charging port , about 2 hours to
be fully charged. The charging status indicator's red light
is always on, full charge is always on the blue light.
Product warranty card
Pause
Play music
Pause
Click the on/off button
Click the on/off button
Music format support: WAV,FLAC,WMA,AAC,MP3,
This card is a product warranty certificate, please keep
it properly
Resume
APE, M4A
Bluetooth / MP3 mode switching:Double click the
power button (multi-function composite button) to freely
switch between Bluetooth and memory mode.
Maintenance and cleaning.
Note : Magnetic charging has a positive and negative
polarity correspondence, mutual adsorption can be
charged normally, and mutual repulsion will not charge
or even cause a short circuit.
Answer the phone
Product name:
Purchase date:
Contact:
Product model:
Client's name:
The headphone can not soak seawater/salt water for a long
time, they use fresh water to rinse and dry. Charging
electromagnetic suction part is easy to corrode.
Headphone status
Function
Operation
Emphasis: The power on automatically default Bluetooth
mode status.
If not used for a long time, please at least once a
month full charge.
Please do not disassemble any parts of the product, such
as the discovery of product defects immediately stop using
the product, and contact the seller after-sales service.
Short press the
power button to answer
Warning : The rechargeable battery of this product must
be disposed of properly for recycling. Please do not put
the battery into the fire ,so as not to cause an explosion .
Indicator
Answer the call
Incoming call
Song download: Connect the original charging cable to
the computer and headphones, you can read the USB,
and copy the computer songs to the USB.
②
③
④
⑤
⑥
Charging
Red linght(always on)
Blue light (always on)
Product maintenance records
Bad phenomenon Solution
After each campaign, please wipe the surface of the
headphone water, especially the location of the filling
electromagnetic suction, to deal with the cleaning in time
to prevent sweat, and salt water corrosion charging port,
affecting the life of the product.
Keep the product away from fire ,heat,freezing sources,
chemicals, violent impact disassembly and extrusion products
are strictly prohibited .
Long press the
power button for 1
second to hang up
Operating instruction
Charging completed
Warm tip: Bluetooth headphone will automatically search for
the latest device to connect after powering on. When the
Bluetooth headphone and the device deviate from the effective
distance of 10 meters (33 feet), the Bluetooth headphone will
be disconnected from the device, and they will be reconnected
only when they are placed within 10 meters again, if the
Bluetooth headphone is disconnected from the device for too
long, then you need to click the multi-function button on the
Bluetooth headphone to reconnect.
Date
Decline the call
Incoming call
Flash in red and blue
alternately
Search for pairing
Operation
Function
On
Indicator
Light on
Light off
volume control
During call
During call
click "+" / "-"
Press and hold ④
(around 3-5 seconds )
Press and hold ④
① Indicator light ② Magnetic suction charging port
③ Volume "-" button ④ On/off button
Blue light flashes slowly
for 5 seconds
Instructions for usage and warranty
Bluetooth music playback
Long press and hold
the power on button
for 1 second
Phone/Bluetooth
headset switch
Off
⑤ Volume "+" button ⑥ Microphone
(around 3-5 seconds )
Please use a charging head with an output of 5V1A or less .
Loading...
