Functions & Features
Overview
LED Indicator
Charging Indicator Light
First Time Set Up
1. Wireless compatible with iOS/Android
2. Up to 13-14 hours total playtime with LEDlight (About 2-3
hours charging time).
3. Built-in microphone.
4. Strong, adjustable design for comfort and durability.
5. Foldable, portable design.
Step 1
· Push “
the ON
” button to
USB-C Charging Port
LED Indicator
LED Indicator
Step 2
Technical Specifications
· Activate Bluetooth Function
· Search & Select device name
· Pair
1. Profiles supported: HFP/AVRCP/A2DP/SMP
2. Working range: 8-10M
3. Resistance: 32Ω±15%
4. Sensitivity: 95±3dB
5. Frequency range: 20HZ-20KHZ
6. Charging voltage: 5V
Charging: RED light stays on
Fully Charged: RED light turns off
Front
Back
LED Indicator
Flashing RED & BLUE
Pairing
Multi-function
Button
Blue light stays on
Flashing RED & BLUE
Connected
Disconnected
Music Playing
Music Pause
When the battery is running low, the LED indicator light will
start flashing red and the headphones will issue an audible
warning. To recharge the headphones, insert the USB
charging cable into the port on the earcup and connect with
a compatible power source (laptop, computer, or via a mains
plug adapter). To indicate that the headphones are charging,
the LED indicator light will show static red turns off when
fully charged.
Kids LED Light
Bluetooth Headphones
Volume Down/
Previous Track
Volume Up/
Next Track
User Instructions
Blue light flash 1 time per 3 seconds
Blue light stays on (After 3 Secs based on
Android system/7 Secs based on iOS system)
Blue light stays on
Blue light stays on when playing or pause
status. Blue light flash 1 time per 3 Secs
when power on status
Turn On
7. Charging current: 500mAh
8. Driver size: 40mm
To turn ON the wireless headphones, press the “
”
USER’S MANUAL
function button. The LED indicator light will flash red and blue
alternately until the headphones are successfully connected.
On/Off
Standby Mode
Incoming Call
Function Button
Type-C
Included
Charging Port
Turn Off
1 x Headphones
1 x Aux-in cable
1 x Type C charging cable
1 x Adapter
3.5mm Aux-
in Cable
To turn OFF the wireless headphones, press the “
function button.
”
1 x Carry pouch
1 x User manual
LED Light Indicator Microphone
No. Function
Functional Requirements Voice Prompt Indicator Light
No. Function
Functional Requirements Voice Prompt Indicator Light
No. Function
Functional Requirements Voice Prompt Indicator Light
Power Status
PHONE CALLS
If the device has been
disconnected from your
phone for less than 5
minutes, they can reconnect
again if it comes back
within the valid range.
Connected
Blue light stays on
Push "
the ON
" button to
Power On
Blue light stays on 1
second then flashing
Blue & Red
14 Over-
distance
1
Power On
26 Automatic If the device is not
Power Off connected within five
minutes, it will
Power off
Red light flash 2 times
When the headphones are connected with an iOS device
(and SOME Android devices), the current power status of the
headphones will be shown in the upper right corner of the
device screen.
Reconnect
automatically shut down
Push "
the OFF
" button to
2
3
Power Off
-
-
27 Light On
Double click "
" button
RGB light cycle flash
display
HAND UP CALL
Press Once
REJECT CALL
Hold For 2 Secs
LAST REDIAL
Double Click
ANSWER CALL
Press Once
-
The device automatically
enters the pairing mode
after power on
Pairing
Flashing Blue & Red
Pairing
Mode
15 Last Redial Four click "
" button
-
-
-
-
-
28 Light Off
Double click "
Double click "
" button
" button
Blue light flash 1 time
per 3 seconds
16 Call Status
-
29 Activate Siri
DU
Blue light stays on
Line-in Mode
Connected
Blue light stays on
4
5
6
Pairing Su-
ccessfully
-
-
LIGHT ON/OFF
Answer Call Press once the "
"
Incoming call Blue light flash 1 time
per 3 seconds
17
To listen via the AUX-in cable, insert the cable into the line-
out port on the right earcup. If you would like to listen to
music wirelessly, you need to remove the AUX-in cable and
turn on the wireless mode.
button when power on status
Disconnected Flashing Blue & Red
BT Discon-
nected
Front
Back
Press once the "
"
Incoming call Blue light stays on
button when playing or
pause status
Press once the "
button
"
"
Blue light flash 1
-
Music Play
LIGHT ON
Double Click
time per 3 seconds
LIGHT OFF
Double Click
DU
Hand Up
Call
Press once the "
button
"
-
-
18
19
Blue light stays on after
3 seconds (Based on
7
Press once the "
button
Music
Pause
Control Functions
Long press the "
button for 2 seconds.
"
Reject Call
Andriod system) Blue
-
-
light keeps on after 7
seconds (Based on
iOS system
VOICE ASSIST
Wired Mode
Wireless Mode
20 Low Battery It will prompt when the
Battery Low
battery voltage is low to 3.4V. (Every 20
seconds)
Red light flash 1 time
per 10 seconds
MUSIC
Clarm
Next Track
8
9
Long press "
" button
" button
-
-
Wireless Mode
for 2 seconds
21 Low Battery Power off automatically
Power Off when the battery voltage
Automatic islower than 3.3V.
Power Off
SIRI
Triple Click
-
Press the “
” function button to turn on. The LED
Previous
Track
Long press "
for 2 seconds
-
-
-
PLAY / PAUSE
PREVIOUS TRACK
Hold For 2 Secs
SKIP TRACK
indicator light will flash red and blue alternately until the
headphones are successfully connected. Ensure that the
headphones are no more than 10 meters away from the
device you want to pair. Used the Bluetooth search list on
your device to find and select the device name to pair with the
headphones. To confirm you have paired the headphones
successfully with your device, the LED indicator light will
show static blue.
Press Once
Hold For 2 Secs
Press once "
Press once "
" button DU DU
(Maximum)
Volume
Up
10
22 Charging
Red light stays on
Red light off
-
-
-
Mode
" button DU DU
(Minimum)
Volume
Down
11
12
Fully
Charged
23
VOLUME
-
-
Automatic Push "
" button to
Connected
Blue light stays on
24 Charging
Automatic to charge when power on.
Power Off
Plug in the charging cable Power off
Red light stays on
Reconnect the ON,the device will be
After Power automatic pair with the
On
last connection
VOLUME DOWN
Press Once
VOLUME UP
Press Once
25 AUX-in
Mode
Plug in the aux-in cable
and the device will power
off automatically.
Power off
Red light flash 2 times
Over-
distance
The device will disconnect Disconnected Flashing Blue & Red
from the phone when it
13
Disconnected over-distance
Loading...
