1.Enable A devices's Bluetooth pairing function
and search for the "HAVIT H655BT"to pair and
connect.And disconnect Bluetooth connection
after successful connection.(Dont’ delete the
pairing name in your device)
Product and Accessories:
Production structure
Basic function
1. Multi-function button(MFB) 5. Charging port
Bluetooth Headphone power on/off
1.Power on: Long press the MFB for 3
seconds;
2.Power off: Long press the MFB for 5
seconds;
2. Volume +
3. Volume -
4. ANC button
6. LED indicator
7. Microphone
8. AUX
2.Connect the headphone with the B
3.5mm audio cable*1
decive,and then turn on the Bluetooth pairing
function of device A to connect the headphone.
(Note:Call gives higher priority than playing
music. The B device gives priority to sound
when both play music or video.)
Bluetooth connection
Follow the steps(Please make sure that your
phone is built-in Bluetooth function)
Headphone*1
Type-C Charging Cable*1
1.Turn on the headphone, the LED indicator
flashes alternately with blue and red, the
headphone enters the pairing status.
(Note: The headphone can automatically enter
pairing status after power on if there is no
re-connection. As the headphone can
automatically reconnect with the last device
that you had paired. To re-connect, you just
need to turn it on.)
Music playing
1.Play/Pause: Short press the MFB
2.PREV: Long press for 1s“-”to switch the
previous song
3.NEXT: Long press for 1s“+”to switch the next
song
②
①
③
④
⑥
4.VOL＋: Short press “+”to increase volume
5.VOL－: Short press”-” to decrease volume
2.Activate the Bluetooth function and search
for “HAVIT H655BT” referring to your phone
instructions.Click “HAVIT H655BT” to connect.
U S E R M A N U A L
ANC mode/Ambient sound Switching
Short press the ANC button to switch on
Ambient sound,ANC mode and Normal mode.
(Note:Power on the headphone,the headphone
stays in Normal Mode.The order to switch
different mode is Normal—ANC ON—Ambient
⑤
⑧
Certificate of quality*1
User's Manual*1
⑦
Dual devices connection
Ensure two devices’s bluetooth open.
U S E R M A N U A L
1
2
3
4
sound ON)
End the current call
Short press the MFB to end the current call.
rechargeable battery, please use the provided
charging cable to charge;
2.Fully charge the product before the first use.;
3.The LED indicator turns red when charging.
After fully charged, the LED indicator will be
steady blue.
Warnings
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
1. Please follow the instruction to operate
2. Please charge the headphone with input
power below 5V/1A, in order to protect the
battery;
3. Please store or use the headphone in a
normal temperature environment.
4. Please keep the headphone from heat
source, such as radiators, hot air regulators,
stoves, or other heat generating instruments.
As it is not anti-high temperature.
5. Don’t jam the ports of the headphone, such
as charger port, LED port and microphone etc..
6. In order to protect your hearing and extend
the headphone service life, it is not
recommended to adjust the volume to the
maximum level for a long time.
Game mode/Music mode Switching
Double click the ANC button to switch Game
mode and music mode
Reject incoming calls
Press the MFB for 1 second when there comes
a call.
(Note:
—Reorient or relocate the receiving antenna.
Game mode:Reduce latency and act surround
sound effect
Music mode:Offer balance sound in a stable
connection)
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Last number redial
Double press the MFB to redial the last calling
number.
Notes
a.Please choose the charger that is certified by
the regular manufacturer.
b.The battery performance may decrease as
repeating charging and using the product. It’s a
normal phenomenon for all rechargeable
batteries.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment .
This transmitter must not be co‐located or operating in conjunction with
any other antenna or transmitter.
Wired mode: Dual 3.5mm Audio Cable
connecting To Audio
1.Plug and play: Connecting the headphone to
a music player with the provided dual 3.5mm
audio cable, the headphone can be used as
wired headphone without starting.
2.In this mode, you can't use any function of the
headphone, including play/pause music, volume
adjustment, microphone and so on.
Activate the voice assistant
Double click the MFB to activate the voice
assistant
Restore factory settings
Specification:
If the earbuds can’t pair frequently, please
restore the factory settings. You can clear the
paired record first and connect your devices
again.
Long press the MFB for 8 seconds to restore
factory settings and the headphone can enter
pairing status again,the indicator flashes
alternately with blue and red.
Headphone Battery: 700mAh
Play Time: 60H(50% vol)/55H(50% vol
with ANC ON)
Talk Time: 60H（50% Vol.）
Charging Time: About 2H
Speaker Size: φ40mm
Speaker Frequency: 20hz~20khz
USB Port: Type-C
Input Voltage / Current: 5V/1A
FCC WARMING
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Answering incoming calls
Short press the MFB to answer incoming calls.
(Note: Since some mobile phones default to
answer calls via their own receiver, please refer
to the instructions of your phone and set on
your phone. )
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
To charge the headphone
1.As product is built-in non-removable and
5
6
7
8
Loading...
