BASS JAXX JAXX HP-3017

Date: 17 JUL 2024  
Product: HP-3017  
SIZE: 250mm x 172mm  
Table of Contents  
1. Introduction  
2. Packaging Contents  
4. How to use  
1 Introduction········································  
2 Packaging Contents······························  
3 Connection Diagram·····························  
4 How To Use········································  
4.1 General Function····························  
4.2 Pairing To Mobile Phone···················  
4.3 Charging Your Headphones ··············  
5 Product Specification····························  
6 FAQ··················································  
7 FCC Statement····································  
8 Battery Statement································  
1
2
2
3
3
4
5
6
6
7
8
Congratulations, and thank you for choosing the  
Tempo Wireless Headphones. This manual will help  
you operate the Tempo Wireless Headphones,  
but firstly you should familiarize yourself with the  
Bluetooth functionality of your mobile phone or other  
devices before using the Tempo Wireless Headphones.  
1 X Tempo Wireless  
Headphones  
1 X Instruction Manual  
Turn on &  
Enter the pairing  
mode  
Press and hold the On / Off  
Button for 2 seconds. After turning on,  
the LED indicator flashes red/blue.  
Tempo  
INSTRUCTION MANUAL  
Thank you for purchasing the Tempo Wireless  
Headphones.This manual provides more information  
about the wireless headphone, please read the  
instructions before using.  
WIRELESS HEADPHONES  
1 X USB Type-C Charging Cable  
Use a mobile phone with Bluetooth  
function or other Bluetooth devices  
to perform necessary pairing action.  
After pairing, the LED indicator slowly  
blinks with blue.  
Pairing  
USB Plug  
USB Type-C Plug  
1(One) Pair of Wireless Headphones  
6.1in. x 6.8in. x 2.6in. (15.6cm x 17.2cm x 6.5cm)  
1(One) USB Type-C Charging Cable  
9.8in. (25cm)  
Press and hold the On / Off Button  
for 3 seconds.  
Turn off  
Please follow the rules depicted in this  
manual closely to ensure your safety.  
Before using this Bluetooth headphones,  
we would strongly encourage you to read  
through this user manual.  
1(One) Instruction Manual  
Plug the USB Type-C to the USB Type-C  
port. When charging, the LED  
indicator turns red. After full charging,  
the LED indicator turns off.  
3. Connection Diagram  
Charging  
Microphone  
Be more wary of any edges, uneven  
surfaces, metal parts, accessories and  
its packaging so as to prevent any  
possible injury or damage.  
USB Type-C  
Charging port  
1
4
Press Play / Pause button to answer phone  
call, press again to end call.  
Press and hold 2 seconds to reject call.  
Double click to redial last call.  
Answering  
a Call  
Do not modify, repair or dismantle this  
Bluetooth headphones. Doing so may  
result in fires, electric shocks, complete  
breakdown of this Bluetooth headphones,  
etc. All are not covered under warranty.  
3
2
Play / Pause  
Music  
Press Play / Pause button to play music  
and press it again to pause music.  
Do not use an diluent or volatile liquid to  
clean the Bluetooth headphones.  
1. On / Off / Pairing Button  
2. Next Song /  
Volume Up Button  
3. Previous Song /  
Volume Down Button  
4. Play / Pause Button  
Previous / Next  
Song  
Shot press Previous / Next Song button.  
Press and hold Volume Up / Down button.  
Do not use the Bluetooth headphones in a  
hazardous location.  
Volume Up /  
Down  
LED Indicator  
5. Product Specification  
7. FCC Statement  
Safety instructions for the lithium battery and  
charging the product  
4.3. Charging your headphones  
4.2. Pairing to Mobile phone or other device  
Driver Diameter: 40 mm  
Impedance: 32 Ohms  
Frequency Response: 20 Hz - 20 kHz  
Sensitivity: 100 dB +/- 3 dB  
Power Supply: Li-ion Battery 3.7V 200 mAh  
Playing Time: 8 - 12 Hours  
Charging Time: 2 Hours  
Bluetooth Range: 32.8 Feet  
Bluetooth Version: 5.3  
USB Type-C Charging Cable Included  
USB Type-C Charging Cable Rating 5V/1A Max.  
FCC STATEMENT  
1. This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received, including  
interference that may cause undesired operation.  
2. Changes or modifications not expressly approved by the party  
responsible for compliance could void the user's authority to  
operate the equipment.  
To use your Bluetooth headphones, you must first pair  
your headphones with a mobile phone or other Bluetooth  
device. Once your Bluetooth headphones is paired to a  
specific mobile phone, they will remain paired and  
automatically recognize each other whenever  
they are within range.  
For your safety, please always use an appropriate  
5V input charger/Adapter to charge the product. DO  
NOT USE Quick Charging USB Adapter to charge the  
product, as it might damage the product.  
-The input voltage to the product is 5V 1A.  
-In order to charge the product in safe manner and reliable  
conditions, please only adopt certified appropriate charger/  
adapter for charging the product.  
Use the USB Type-C charging cable accessory provided  
with this headphones. Connect the USB Type-C plug to  
the USB Type-C charging port on the headphones  
-Only charge the product at ambient temperatures between  
10 °C/ 50 °F and 40 °C/104 °F.  
-Do not heat above 70 °C/158 °F, e.g. Do not expose  
to sunlight or throw into fire.  
1
positioned at  
in headphones diagram on page 2.  
Connect the USB plug to a USB port on wall adapter to  
activate charging.  
NOTE: This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation.  
This equipment generates uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of  
the following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
- Consult the dealer or an experienced radio/TV technician  
for help.  
-Switch off the product after use.  
-Please note that we won’t take any responsibility for any wrong  
operation (e.g. Voltage higher than 5V) as this may result in  
severe injury or loss of property, and we cannot control the  
operating process during the time the user using this product.  
Turn on your phone and ensure the Bluetooth  
function is activated.  
**Make sure to keep the headphones charging  
for a minimum of 2 hours before initial use.  
Turn on the headphones, enter the pairing mode.  
-In extreme cases, abuse or misuse of Lithium battery pack can  
lead to explosion, heat generation, fire development or smoke  
development.  
Search your Bluetooth devices on your phone  
by following the phone’s instructions. Refer  
to your phone’s user manual for more  
information.  
USB Type-C Charging Cable  
6. FAQ  
The Bluetooth® word mark and logos are registered trademarks owned by  
Bluetooth SIG, Inc. and any use of such marks by 1616 Holdings, Inc. is under  
license. Other trademarks and trade names are those of their respective owners.  
USB Plug  
USB Type-C Plug  
1. Why is there no power even when the headphones  
is turned on ?  
Ans: Ensure the battery has been charged up to  
1 hour for initial use.  
After a few seconds the phone will list the  
HP-3027 as a discover device.  
Select it and follow your phone’s instructions  
to select this pairing.  
Warning:  
You must select a qualified charger from  
a regular manufacturer.  
You must charge the Bluetooth headphones  
if it has not been used for more than 6 months.  
2. There is no sound when playback.  
FCC ID: 2ADM5-HP-3017  
Ans: Check the connection between headphones  
with phone or computer, if the connection is not  
established, please connect again. Make sure the  
headphones is paired and connected with your target  
phone or other master device.  
Your phone will confirm the pairing, and then  
press Yes/OK.  
CAUTION: The USB Type-C charging cable included  
with this item is intended for use with this product.  
Only use the included USB Type-C charging cable to  
charge this product.  
Item # HP-3017  
Distributed by: 1616 Holdings, Inc.  
701 Market Street, Suite 200  
Philadelphia, PA 19106  
RF Warning Statement:  
The device has been evaluated to meet general RF exposure  
requirement. The device can be used in portable exposure  
condition without restriction.  
USB Type-C Charging Cable rating 5V/1A Max.  
Made in China  
Keep All Relevant Information For Future Reference  
Approval:  
Date:  
1 Star2 Stars3 Stars4 Stars5 Stars (No Ratings Yet)
Loading...
BASS JAXX HP-1006 Wireless Headphones
BASS JAXX HP-1006 Wireless Headphones
BASS JAXX HP-3059 Wireless Headphones
BASS JAXX HP-3059 Wireless Headphones
BASS JAXX JAXX HP-3017 Wireless Headphones
BASS JAXX JAXX HP-3017 Wireless Headphones
BASS JAXX HP-0911 Wireless Headphones
BASS JAXX HP-0911 Wireless Headphones
BASS JAXX KAWAII HP-0826 Bubble Wireless Headphones
BASS JAXX KAWAII HP-0826 Bubble Wireless Headphones
BASS JAXX HP-0822 Sports Wireless Headphones
BASS JAXX HP-0822 Sports Wireless Headphones
BASS JAXX HP-0722 Bubble Wireless Headphones
BASS JAXX HP-0722 Bubble Wireless Headphones
BASS JAXX 2ADM5-HP-3035
BASS JAXX 2ADM5-HP-3035
BASS JAXX HP-0722
BASS JAXX HP-0722
BASS JAXX HP-3059
BASS JAXX HP-3059

BASS JAXX JAXX HP-3017
BASS JAXX JAXX HP-3017, available in PDF format, explains how to use your headphones, earbuds, or headset. It includes pairing steps, button functions, charging, and basic care tips. It can be downloaded for free.

BASS JAXX JAXX HP-3017 Overview

Type: Over-ear
Connection type: Wireless
Bluetooth version: 5.0
Driver size: 40 mm
Frequency response: 20 Hz – 20 kHz
Impedance: 32 Ω
Sensitivity: 105 dB
Microphone: Yes
Battery life: Up to 20 hours
Charging time: 2 hours
Controls: Volume control, Play/Pause, Track navigation
Weight: 250 g
Colour: Black
Brand: BASS JAXX
Model: JAXX HP-3017
Low Latency Mode: Yes
Fast Pairing: Yes

Summary of Contents

  • Page 1: Congratulations, and thank you for choosing the Tempo Wireless Headphones. This manual will help you operate the Tempo Wireless Headphones. Before using the Tempo Wireless Headphones, familiarize yourself with the Bluetooth functionality of your mobile phone or other devices. Please follow the rules depicted in this manual closely to ensure your safety. For your safety, please always use an appropriate 5V input charger/Adapter to charge the product. Make sure to keep the headphones charging for a minimum of 2 hours before initial use.
BASS JAXX JAXX HP-3017 User Manual